Spike Brewing Flex+ (Plus) Steel Fermenter


Out of stock


The Spike Brewing FLEX+ fermenter is the next level in homebrewing fermenters. You will appreciate the high quality of the USA craftsmanship and the awesome amount of options to expand the features of your fermenter.

Introducing the new Spike FLEX+! The FLEX+ was designed to be the most versatile, upgradable and longest lasting small batch fermenter on the market. With currently over 20 accessories (and counting) you’ll never run out of run toys to bling your FLEX out with. The FLEX+ is the big brother to the standard FLEX. Out of the box it features an upgraded tri-clamp racking arm, tri-clamp butterfly valve and upgraded high pressure lid and clamp that can handle up to 15psi. The higher pressure rating allows for carbonating your beer in the same tank you fermenter in. Carbonate your beer in 24hrs opposed to 7 days!

Flex Features:
-304 stainless steel; 1.2mm (18ga)
-All sanitary welded ports (no-weldless fittings)
-Designed for 2.5 to 6gal batches
-7gal total capacity
-15psi working pressure
-Use for pressure transfers
-Use as a brite tank
-Etched volume markings
-Fully polished finish

-15″ wide by 21¨ tall (to top of 4″ TC)
-See additional dimensions here

Lid Features:
-4″ TC modular top port
-Allows for hop additions, temp control coil, top sight glass, etc
-1.5″ TC port
-Use with blow off or air lock, blow off cane, pressure manifold, CIP ball, etc
-Stainless band clamp for attaching the lid
-Completely removable lid for easy cleaning

Body Features:
-1.5″ TC racking port with rotatable racking arm
-1.5″ TC secondary port for thermometer, sample valve, etc

The Flex+ includes a tri-clamp rotatable racking arm as a standard item. This allows you to rotate the racking arm as you drain your Flex+. You’ll start draining in the upwards position and rotate until the beer stops running clear. The Flex+ comes with a racking arm that has an indicator so you can easily see what orientation the racking arm is at from the outside.

The Flex+ features a 4” tri-clamp welded onto the lid. Why? Modularity. This allows you to attach our drop in temp control coil, clear cap and allows for easy hop additions. Our temp control coil extends deep into the Flex so both full batches (5-6gal) and half batches (2.5-3gal) can be efficiently cooled. The 4” port also allows for unmatched simplicity when adding hops during your fermentation. Gone are the days of removing the entire lid which allows oxygen in and also opens the door for an infection.



There are no reviews yet.

Be the first to review “Spike Brewing Flex+ (Plus) Steel Fermenter”

Your email address will not be published. Required fields are marked *